S-60W switching power supply

Protections: Short circuit/ Overload 100% full load burn-in test Low cost, hogh reliability

Model	S-60-5	S-60-12	S-60-15	S-60-24
Specification
DC output voltage	5V	12V	15V	24V
Output voltage error(Note,2)	±2%	±1%	±1%	±1%
Rated output current	12A	5A	4A	2.5A
Output current rage	0-12A	0-5A	0-4A	0-2.5A
Wave and noise(Note ,3)	120mVp-p	120mVp-p	150mVp-p	150mVp-p
Inlet stability(Note ,4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stablity (Note ,5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	60W	60W	60W	40W
Efficiency	72%	76%	77%	79%
Adjustable range for DC voltage	+10,-5%	10%	10%	10%
AC input voltage range	85-264VAC 47-63Hz,120-370VDC
Input current	2A/115V 60A/230V
AC INnrush current	Cold-start current 30A/115V 60A/230V
Leakage current	<3.5mA/240VAC
Overload proctection	105%~150% Tpye:pulsing hiccp shutdown Reset,auto recovery
Over-voltage protection	115%~135%
High-temperature protection	…………
Temperature coefficient	±0.03%/°C(0~50%)
Setup rise hold up time	800ms,50ms,10ms/115V 300ms,50ms,80ms/230VAC
Vibration	10-500HZ,2G 10min,/1cycle,Period for 60min,Each axes
Withstand voltage	Input and output internal,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC
Isolation resistance	Input and output internal,Input and enclosure,Output and enclosure,500VDC/100MΩ
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity	-20°C~+85°C,10%~95%RH
Overall dimension	159×97×38mm
Weight	0.55Kgs
Safety standards	UL1012 TUV EN6050(IEC,UL1950)Approved
EMC standards	CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification
Note
1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%.
6.C2,3,6 must be knocked down.

S-60W switching power supply